Cost Guide: How Expensive is Shower Installation in Arlington?
The decision to install a shower in your Arlington home can be motivated by a number of reasons including safety, increasing your home’s value, boosting the curb appeal of your home, etc. Knowing what options you have and the costs can be a great way to get your shower installation project off the ground.
Although you wouldn’t be wrong to say that a shower installation is one of the most expensive parts of the bathroom upgrade, the expense can easily be justified, especially because the shower is used every day.
In this article, we present to you a cost guide on the cost of installing a shower in your Arlington home. Our company is the go to for homeowners who need an Arlington bathroom remodel.
What determines the cost of shower installation?
The cost of shower installation in an existing bathroom is determined by a few factors. These are some of them:
- The condition of the old shower,
- the size of the shower
- Your choice of materials and fixtures
- The labor and material costs in Arlington.
There’s always the potential for unexpected complications when it comes to projects that involve opening ceilings, walls, and pipes, a shower installation is no exception. You may encounter rot, mold, and structural or plumbing problems. These complications will definitely impact the cost of installation. Early discovery of these problems can prevent them from becoming worse down the line.
Prefabricated shower
One major factor that determines the cost of prefabricated showers is the material with which the surround is made of. The surround is basically the part of the shower or bathtub area that lines with the wall.
Acrylic is the most common surround material and it costs between $300 and $1,200. More suitable for smaller showers, a fiberglass surround ranges from $300 to $600. Marble surround is the most expensive prefabricated option, costing between $600 and $2,000.
A shower pan will also be needed to serve as the base which helps to direct water to the drain. The cost of a prefabricated fiberglass or acrylic shower pan is between $200 and $400, while the composite option can cost around $600.
Walk-In Shower
A walk-in shower is a shower that doesn’t have a tub. The cost of removing a bathtub and installing a walk-in shower will largely depend on your shower size and your choice of design. It would cost you an average of between $500 and $2,000 to install a prefabricated or small walk-in shower. A custom-made or large one should cost between $3,500 and $7,000.
Bathtub to shower conversion
The cost of removing a bathtub and then installing a shower can range from $1,200 to $3,600.
How much does it cost to tile a shower?
Rather than use fiberglass or an acrylic surround, a custom shower can be tiled. This can cost from $10 to $20 on labor per square foot. There are a number of materials that can be used to tile your shower; the following are some of them:
- Ceramic: These tiles are available in different shapes and colors, all with varying costs depending on quality. Ceramic tiles can be used on the floor, ceiling, and walls of the shower. They cost between $1 and $100 per square foot.
- Porcelain: Usually larger than ceramic tiles, this material option costs anywhere from $3 to $8 per square foot.
- Stone: The most common stone tiles found in showers include slate, marble, and granite. Just like porcelain, your shower can also be tiled with larger stone slabs. It is important to note, however, that your shower walls will need to be reinforced because of the added weight of these large stone slabs. The cost of putting stone slabs in a standard shower is around $400. Stones used in the shower should be regularly resealed.
- Glass: These are available in many colors and are quite easy to maintain. An artistic arrangement of glass tiles can give unique mosaics. You can expect to spend from $20 to $50 per square foot on the materials. However, the cost of installation can be high.
Showerheads
If you’d like to have a tile or rainfall showerhead installed in the ceiling, you can expect to spend an extra $600 on your project in addition to the cost of the showerhead. Adding a set of body jets to your new shower may increase the installation cost by another $1,000. The cost of handheld and fixed showerheads can range from $25 to $500.
Final thoughts
How expensive a shower installation will be in your Arlington home will depend on a variety of factors. The best thing to do is to work with a reputable contractor in Arlington. The contractor will inspect your bathroom and give you an estimate based on your choice of design and materials. Check out the Inch Calculator to get a rough estimate.